Gopro Hero 3 Black Sd Karte

A slight departure from my usual web development posts but thought I'd share my feel and solution to what seems to be a common issue with the new GoPro Hd Hero iii Black Edition relating to microSD cards – SD ERR.

This is my 3rd GoPro, having previously owned the 960 and the 1080. With the exception of a faulty battery on my 1080 (which GoPro promptly replaced), I'd experienced no issues with either so was a little dismayed to find that I couldn't just burn upwards the camera and start shooting out of the box.

The solar day I ordered my GoPro 3 Black Edition (from a seller on eBay) I too ordered a class 10 32Gb microSD card from a different seller. Every bit many will practise, I opted for the cheapest option rather than a name brand (long story short – this is the issue).

When both arrived, I put the microSD straight from the packaging into my new camera and turned it on, only to be presented with the message "SD ERR". A piddling perplexed past this, I did some research and found a number of forum posts with similar issues, suggesting formatting the bill of fare would solve my woes. I plugged the microSD into the supplied adapter and into my laptop and formatted the microSD (on Mac OSX – Disc Utility > Erase (MS-DOS (Fat))). I popped information technology back into my camera and certain enough the error had gone away. I proceeded to perform the manual firmware update and took a couple of photos. Everything seemed fine.

A couple of days later, I took my my new GoPro Blackness Edition out to film for the first fourth dimension. I wanted to try some sweet slow-mo's with WGA 240fps. I ready the camera up, connected to it through the iPhone app and pressed tape. I went back to the photographic camera a couple of minutes afterward and it wasn't recording. Strange. Maybe I hadn't pressed the record button. I started recording again and watched it. Information technology cutting out after 11 seconds (I found reports online of other people's cutting out at 4s, 8s and some seemed to be random, sometimes 2s sometimes two minutes). It did this over and over once again.

I tried other resolutions and frame rates and had this issue with all the higher ones (720p @120fps, 1080 @ 60fps). They all stopped recording after 11 seconds. Lower res and frame rates were fine (720 @ 60fps, 1080 @ 30fps, etc etc) and I could seemingly record for as long every bit I wanted.

When I got the footage domicile and plugged it into my mac, all the video files I had recorded were there but they were an identical file size (~42MB) and seemed to be corrupt. They wouldn't play in VLC (I've never had bug playing raw GoPro video on VLC before) and Quicktime was telling me they were an unrecognised file type. I tried formatting the card over again a few times and kept getting the Same "SD ERR" I had before.

I sent an email to GoPro to this effect. Very fast respond which I appreciate but it was mostly a copy and paste response and there was not a lot of useful info. I take pasted their reply beneath for reference.

I turned to Google again and discovered that grade ten retentivity cards can vary greatly in quality and then decided to splash out for a quality one to come across if this would work. I bought the sandisk menu recommended on GoPro's site. I put it into my camera and it worked straight away without needing to format. I can record for as long every bit I want at whatsoever res and frame rate so far no issues.

Information technology wasn't a problem with the camera. Information technology was just me existence a cheapskate.

This is the Sandisk card I bought which you tin can buy from amazon here: http://amzn.to/13exDNn

SanDisk MicroSD

You lot can access my YouTube channel here, where yous tin can see my GoPro videos and edits

Hey Fraser,   I am sorry to hear that you are having troubles with your new camera. If your photographic camera is freezing while recording it is usually related to the firmware. I realize that you have updated to the most recent firmware. Sometimes the updates don't install fully and it can lead to the problems that you are seeing. I recommend that you re-update your photographic camera manually. Manually updating is the best remedy to solve these kind of glitches. When you manually install the firmware it is like a factory reset for your camera.   I am a niggling perplexed about your SD card. I'm not sure why the camera is unable to recognize information technology. Have you tried reformatting information technology inside the computer again and re-inserting to your camera?    Click here to lookout a video that walks you lot through the HERO3 firmware update.  If your camera'southward firmware is already up-to-date, but you demand to re-update it, you'll need to follow the manual update path.  The video walks you through how to manually update the camera.  We also typed out the transmission update instructions for you below.   Here's how to manually update your HERO3 photographic camera's firmware:  Go to http://gopro.com/back up/product-registration/hd-hero3-cameras/ and consummate all of the steps on the beginning folio except for Step 6.  Be sure to reformat your SD menu either in the camera or on your figurer with a card reader.  And so, click "Go along" without the camera connected to the calculator.  The firmware updater will permit you download the firmware files to your computer later you enter the customer and camera information.  It'll also requite you instructions on how to manually complete the firmware update after you lot've downloaded the files to your calculator.  Here are some things to take note of as you go through the update:  Steps 1 and two require you to enter your personal information and your photographic camera'southward serial number.  Step three – Camera Setup: We recommend against skipping this footstep, even though you're given the option to practice so.  This is the step where you create your photographic camera'due south proper name and Wi-Fi password.  If your camera has had trouble connecting to the GoPro App in the past, renaming the camera and resetting its countersign can clear up the consequence.  Here are camera name and password requirements:  Your photographic camera proper name and countersign must be at least 8 characters.  It tin can comprise the following characters: Lower and upper case letters, numbers 0-9, at symbol "@", dash "-", and underscore "_".    Stride 4 – Product Update This is the step where yous download the firmware files to your computer.  This is besides where you lot're told how to place the files on your SD menu and update the camera.  We'll walk yous through the steps:  1.  Download and unzip files on your figurer: When y'all click the "Download Update" push button, a null file called "Update.zip" downloads to your estimator.   Mac: If y'all're on a Mac, Update.zip will be downloaded to your Downloads folder in your Dock, adjacent to your trashcan.  Click on "Update.zip" to unzip the folder and get to your firmware files.     Windows: If you're using windows, Update.zip will be downloaded to your Downloads folder (annotation – if you don't see the file in your Downloads binder after clicking on the "Download Update" push button, then yous should enquiry what location your files download to for the web browser that opened when you clicked on the link).  Update.aught will be in that location.  Double-click "Update.cipher" to unzip the folder and become to your firmware files.  Do not double-click on any of the files inside the folder Update.zip folder though.  2.  Double-bank check that y'all have the correct files for your camera: In one case you've unzipped the Update.zip binder on your Mac or Windows figurer, you'll see a new window open with your firmware files in it.  At that place will exist 4 files if you set up your photographic camera'southward name and Wi-Fi password in "Pace 3 – Camera Setup".  If you skipped this footstep, at that place will be three files.  Here's a list of the files you'll encounter for your camera.  Recollect; do not double-click on any of these files.    Blackness Edition: HD3.03-firmware.bin WF3.03-app.bin update.cmd settings.in (Note – You will NOT accept this file if you lot skipped "Pace 3 – Camera Setup".)  3.  Put the firmware files on your SD menu. At present y'all need to put all (3 or 4) firmware files on the root level of your SD card.  To do this, you need to open up your SD bill of fare on your estimator by using a card reader or your camera.  To open your SD card on your calculator with the camera, power on your camera with your SD card inserted, and so connect your camera to your computer.    Next, locate your SD card in your "Figurer" window if you're on Windows or your "Finder" window if you're on a Mac.  Your SD bill of fare will be named something like "NO NAME", "UNTITLED", "Removable Disk (E:)", or "Removable Disk (F:)".  Open your SD carte du jour by double-clicking on it.  A window will open that shows you lot the contents of your SD card.  Next, drag all (3 or four) firmware files we listed to a higher place into the empty space in the middle of SD card window.  If you run across MISC and DCIM folders in the SD bill of fare window, put the files next to those two folders, NOT within them.  The files will copy over, and you should then see them in the window.  4.  Safely eject your SD card: To do this, locate your SD card in your "Computer" window if yous're on a PC or your "Finder" window if you're on a Mac.  Right-click on your SD menu and click "Eject".  If your camera is connected to the calculator, physically disconnect your camera from the figurer, and make sure the camera is powered OFF.  5.  Update the photographic camera'southward firmware: If it isn't already, insert the SD card in the camera while it's powered OFF and already disconnected from the computer.   Next, power ON your photographic camera with it still disconnected from the computer.  The update will brainstorm automatically.   Once the camera beeps and turns itself OFF, power information technology dorsum on by pressing the Power button 1 time.  You lot should encounter 00 on the file counter, indicating that your firmware update was successful and your camera is ready to utilise.  I hope this clears things upwards.  Delight permit me know if yous have whatever questions.  Many Thank you, Cooper M.  GoPro Back up http://gopro.com/support/        

Source: https://blog.fraser-hart.co.uk/gopro-hd-hero-3-sd-card-error/

Posted by: meekinstheady.blogspot.com

Share this post